About Cowboy Containments

Cowboy Containments, Inc. manufactures high quality secondary containment systems. We pride ourselves in attention to detail. Our containments have been designed in house and are made of the best materials available. We are a Small Veteran-Owned Business, with over 30 years combined experience in the oil and gas industry. With the ever popular need of taking care of our environment, we have taken it upon ourselves to meet the growing demand for environmental protection.

We are committed to providing our customers with the best containment system on the market. We manufacture CUSTOM SIZE portable secondary containment systems and offer a full line of spill clean up products, ranging from absorbents to spill kits.

We've also teamed up with Polly Wall in order to provide our customers with yet another avenue to achieve their containment goals. With Poly Wall we are able to offer portable and temporary above ground water storage as well as flood control and secondary containment systems that require a smaller footprint and taller berms. We are just a phone call away and are available to help you 24 hours a day. 

No job is too big or small. We know that once you use Cowboy Containments, you will be happy with the product as well as the customer service. Customer feedback is always appreciated and encouraged. We look forward to working with you and keeping you and your team both compliant and safe.


Is the system chemically compatible with the products being stored?
Containment system sumps are primarily constructed of one or more materials: high density polyethylene (HDPE), linear low-densitypolyethylene (LLDPE), and steel. Polyethylene skids usually have material choices for grids or platforms. The choice of material depends on chemical resistance as well as disposability of the product. Examples include:

  • Wood platforms – Once contaminated, they are disposed of according to local regulations.
  • Fiberglass grids – Compatible with a wide variety of chemicals, but not suitable for corrosive materials.
  • Polyethylene grids – Compatible with a wide variety of chemicals including many corrosive materials.

How will the system be monitored and cleaned?
Most units have drains. If they don't, usually a spill cleanup kit will be adequate to clean up the internal sump area of the system.

What volume and weight of the containers will be stored?
According to federal codes, a containment system must have a sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater. Some states may have more stringent restrictions and you should contact your local fire marshal for your local requirement. Containment systems are commonly rated with a static weight capacity. This is a weight in a stationary mode.

How often will the containment system be moved? How will it be moved?
Portable containment units are intended to be moved without containers on them. This is the safest mode of transport. The containers can be replaced once the containment system has reached its destination. Most portable containment systems are constructed with fork pockets. These are designed to accept and be moved by forklifts.

How will the containers be loaded onto the system?
Ramps that accommodate containment systems are the easiest way to load a system. Low-profile containment systems have also beendeveloped to address the loading issues.

How many containers will be loaded on the system?
Portable containment systems range from accommodating four 5-gallon pails to one 55-gallon drum to whole-room containment systems for drums. Make sure when dealing with flammable products and the larger containment systems that your local fire codes are met. There are restrictions for quantities of flammable products that can be stored in one area depending on the class of the flammable product.

Are any of the products being stored considered flammable?
Special provisions need to be taken into account, such as grounding and bonding and the amount of flammable product being stored in one area. Check into local codes for these specifications. 

What are the state and local codes for secondary containment in your area?
A listing of the regional EPA offices can be found on EPA website. Phone numbers of divisions that deal with secondary containment are listed. The regional office can refer to state EPA agencies that can explain state codes. Another source for secondary containment requirements is your local fire marshal.

Refer to these links often to ensure that your company stays within compliance!